Monitor Projector Extension
Monitor Projector Extension

Panasonic Pt-Ae3000 Home Theater Projector
Introduction
The PT-AE3000 is the latest evolution of Panasonic home theater projectors in the range of the successful series PT-AE, which began back in 2001 with a small PT-AE100. The new PT-AE3000 is characterized by the latest evolution dell engine manufactured by Epson 3LCD which helped to increase,Introduction
Panasonic PT-AE3000 Home Theater Projector
The PT-AE3000 is the latest evolution of Panasonic home theater projectors in the range of the successful series PT-AE, which began back in 2001 with a small PT-AE100. The new PT-AE3000 is characterized by the latest evolution dell engine manufactured by Epson 3LCD which helped to increase,
Panasonic PT-AE3000 Home Theater Projector
compared with its predecessor the native contrast ratio. The most interesting concern is the reduction of motion blur (loss of detail for moving images), the increase of flow of material at 24p, 25p and 30p and increased native contrast ratio.
Panasonic PT-AE3000 Home Theater Projector
The presence of a new optical motorized, with the possibility of storing two positions one for the 16:9 and the other for 2.35:1. We had already introduced the new Panasonic PT-AE3000 projector.
Reply With Quote
#2
Old 28-08-2009
Spykar Spykar is offline
Member
Join Date: Oct 2005
Posts: 294
Re: Panasonic PT-AE3000 Home Theater Projector
Installation and menus
Appearance, size and characteristics of the objective allows unparalleled versatility of installation especially in environments where space available is inversely proportional to the size of the screen that you want to achieve. As indicated in the technical characteristics the ratio of target shooting is between 1,34:1 and 2,67:1. Recall that the ratio of shooting is the mathematical relationship that exists between the bottom of the image and the distance between the lens and the image itself. In this case, the PT-AE3000 is capable of projecting an image from 2 meters of base (90 ") at a distance of between 2.7 meters and 5.3 meters in practice, you can choose whether to place the projector front, maybe on a table, or behind, maybe on top of a shelf or on a bracket on the ceiling. the goal in tele position (so with the projector away from the screen) you can lose up to 40% of the lumen relative to the position wide.
The PT-AE3000 projector by itself as a highly versatile. Versatility included also in the configuration menu that preserves the basic approach that earned the success of the models 1000 and 2000 in recent years. In particular i appreciate the wide degree of adjustment provided by the advanced menu of the image settings that allows you to tweak the white balance for each Rgb Component of both high and low lights and store different color profiles all Internal menu color management by being able to operate regularly on certain portions of the projected image .Memorable even in the latter model is the presence of the waveform monitor that analyzes and displays waveforms of the individual components of the RGB and luminance allowing you to view instrumental corrections that are made. The scan mode signal is significantly increased compared to previous models and was also introduced in the mode Auto Adjust but in practice has not proved very helpful in the calibration.
In addition to the excellent versatility for the calibration of gamma and white balance, also highlighting the possibility to calibrate the colors through a CMS (color management system) a little 'special and already used in other projectors PT-AE series. Rather than selecting a color (primary or secondary) from the menu, you select an image, through a cursor. In this sense it is very useful to a screen with color bars. The CMS allows you to speak up to 8 colors. Modulation of the controls is quite extensive although it is not always guaranteed an adequate response to those colors distant from the point of intervention.
Absolute novelty of the PT-AE3000 are the ability to store two different positions on the optic wire (which acts at the optical zoom and focus) to pass quickly and particularly optically by 16 / 9 format than 2.35:1 ( for those who have a screen with this aspect ratio) and 100Hz call Frame Creation and which can operate in two modes more or less invasive. I must say that the system developed by Japanese technicians, is very effective and can actually reduce any micro clicks without ever appearing too invasive and especially keeping almost intact the effect of depth film. Also, under Options you can set the Frame Response between normal and fast, thus reducing the lack of Motion Blur that can appear especially during gaming sessions.
Reply With Quote
#3
Old 28-08-2009
Spykar Spykar is offline
Member
Join Date: Oct 2005
Posts: 294
Re: Panasonic PT-AE3000 Home Theater Projector
lumen and contrast ratio
The most interesting mode for home theater viewing ( colore1, colore2, Movie1, Movie2, cinema3) are characterized by the employment of a color filter inside the projector, as already happened for the other models series. The filter (very similar to FL-Day) dramatically reduces the light flux that remains in this mode, still below the 300 lumens, even with the wide lens position. With the shift from objective widescreen mode to the more remote, the luminous flux is reduced by about 40%.
The improvement over the older generation is also sensitive with regard to the contrast ratio that is between about 2.500:1 and about 9.500:1, depending on the intervention of the various modes . compared with its predecessor the native contrast ratio. The most interesting concern is the reduction of motion blur (loss of detail for moving images), the increase of flow of material at 24p, 25p and 30p and increased native contrast ratio.
The presence of a new optical motorized, with the possibility of storing two positions one for the 16:9 and the other for 2.35:1. We had already introduced the new Panasonic PT-AE3000 projector.
Reply With Quote
#2
Old 28-08-2009
Spykar Spykar is offline
Member
Join Date: Oct 2005
Posts: 294
Re: Panasonic PT-AE3000 Home Theater Projector
Installation and menus
Appearance, size and characteristics of the objective allows unparalleled versatility of installation especially in environments where space available is inversely proportional to the size of the screen that you want to achieve. As indicated in the technical characteristics the ratio of target shooting is between 1,34:1 and 2,67:1. Recall that the ratio of shooting is the mathematical relationship that exists between the bottom of the image and the distance between the lens and the image itself. In this case, the PT-AE3000 is capable of projecting an image from 2 meters of base (90 ") at a distance of between 2.7 meters and 5.3 meters in practice, you can choose whether to place the projector front, maybe on a table, or behind, maybe on top of a shelf or on a bracket on the ceiling. the goal in tele position (so with the projector away from the screen) you can lose up to 40% of the lumen relative to the position wide.
The PT-AE3000 projector by itself as a highly versatile. Versatility included also in the configuration menu that preserves the basic approach that earned the success of the models 1000 and 2000 in recent years. In particular i appreciate the wide degree of adjustment provided by the advanced menu of the image settings that allows you to tweak the white balance for each RGB component of both high and low lights and store different color profiles all Internal menu color management by being able to operate regularly on certain portions of the projected image .Memorable even in the latter model is the presence of the waveform monitor that analyzes and displays waveforms of the individual components of the RGB and luminance allowing you to view instrumental corrections that are made. The scan mode signal is significantly increased compared to previous models and was also introduced in the mode Auto Adjust but in practice has not proved very helpful in the calibration.
In addition to the excellent versatility for the calibration of gamma and white balance, also highlighting the possibility to calibrate the colors through a CMS (color management system) a little 'special and already used in other projectors PT-AE series. Rather than selecting a color (primary or secondary) from the menu, you select an image, through a cursor. In this sense it is very useful to a screen with color bars. The CMS allows you to speak up to 8 colors. Modulation of the controls is quite extensive although it is not always guaranteed an adequate response to those colors distant from the point of intervention.
Absolute novelty of the PT-AE3000 are the ability to store two different positions on the optic wire (which acts at the optical zoom and focus) to pass quickly and particularly optically by 16 / 9 format than 2.35:1 ( for those who have a screen with this aspect ratio) and 100Hz call Frame Creation and which can operate in two modes more or less invasive. I must say that the system developed by Japanese technicians, is very effective and can actually reduce any micro clicks without ever appearing too invasive and especially keeping almost intact the effect of depth film. Also, under Options you can set the Frame Response between normal and fast, thus reducing the lack of Motion Blur that can appear especially during gaming sessions.
Reply With Quote
#3
Old 28-08-2009
Spykar Spykar is offline
Member
Join Date: Oct 2005
Posts: 294
Re: Panasonic PT-AE3000 Home Theater Projector
lumen and contrast ratio
The most interesting mode for home theater viewing ( colore1, colore2, Movie1, Movie2, cinema3) are characterized by the employment of a color filter inside the projector, as already happened for the other models series. The filter (very similar to FL-Day) dramatically reduces the light flux that remains in this mode, still below the 300 lumens, even with the wide lens position. With the shift from objective widescreen mode to the more remote, the luminous flux is reduced by about 40%.
The improvement over the older generation is also sensitive with regard to the contrast ratio that is between about 2.500:1 and about 9.500:1, depending on the intervention of the various modes .
About the Author
Panasonic PT-AE3000 Home Theater Projector
Why does my 2nd monitor show as an extension of my desktop... and not just show my desktop?
I have a Dell Latitude D600 Laptop. When I attempt to connect to the office projector via VGA, the projector shows an extension of my desktop, as if my desktop on my laptop extended to the right.
I want the projector screen to show what I am doing on my laptop... in essence, I want the same image on my laptop, that is on the projector.
Is it a settings problem?
Thanks SO MUCH for your help.
But I do not have an nVidia icon on my control panel, nor do I see anything else that seems to be video related (besides display).
Any other ideas? I'm at a loss ![]()
Sorry... nothing on my desktop either.
Can't tell you how much I appreciate it. Thanks!
Still can't find anything on the search. That is the name of my Video Card, as I can see it in the display settings, but I can't find anything on it!
I will keep checking
you need to change the settings on your video card control. If you have an nVidia card (or not, as long as it has a program to help configure settings) then check you Control Panel for the program that should be labeled nVidia. When you get there go to the "set up multiple displays" section or tab, then instead of choosing "extend my desktop", choose "Mirror", or "clone"
good luck
did you try this to see if it will work?
ill be here to help if not, for about 5 minutes
so let me know
also, if you can't find the program in the control panel, then right click on yoour desktop, there may be a shortcut to the video card's program built in there.
Addition:
okay I'll see what I can find....
Okay, here's one more thing you can try, your laptop comes with the ATI Mobility Radeon 9000 AGP 4x , so search your computer (Search) for any of those keywords, try 'ATI', or 'Radeon', and if you can find a program, try to navigate to the "set up mult. displays" section. And select 'clone' onto projector. Also, if your laptop came with a "Set Up a Projector" program, or if your projector comes with a drive, then you can just follow the instructions they give you there. Also, when you connect to the projector, you may recieve a pop-up informing you of teh connection, with a choice to adjust the projector settings.
good luck
Solve on 60 inch TV
![]() |
![]() 50FT SVGA VGA M/F PROJECTOR/MONITOR Extension Cable 50' US $6.95
|
![]() 15FT SVGA VGA M/F Monitor/PROJECTOR Extension Cable 15' US $2.95
|
![]() 50FT SVGA M/F Monitor/LCD/Projector Extension Cable 50' US $7.95
|
![]() 75 FT SVGA M/F Monitor/LCD/Projector Extension Cable US $12.99
|
![]() 6FT SVGA LCD/PROJECTOR M/F Monitor Extension Cable 6' US $1.95
|
![]() 10 FT VGA SVGA Extension Cable M / F Monitor Projector US $7.65
|
![]() 6 FT VGA SVGA Extension Cable LCD Monitor Projector US $5.74
|
![]() 15 FT VGA SVGA Extension Cable M F Monitor Projector TV US $12.44
|
![]() 50 FT VGA SVGA Monitor LCD Projector Extension Cable US $28.73
|
![]() 25 FT VGA SVGA Extension Cable Monitor Projector LCD US $15.32
|
| Powered by phpBay Pro |


US $6.95



































































































































































































































































































